Metro Connect, one network across sites
Link data centers across the Seoul metro area over dedicated Layer 2 and use them as one site.
Three data centers on one Layer 2 network
KINX Gasan, KINX Dogok and Netreality SL1 sit on the same DWDM backbone. Traffic between them stays off the public internet.
KINX Gasan
Gasan-dong, Geumcheon-gu
- L2 and DWDM
- Direct KINX-IX connection
- Cross Connect · Cloud Connect · IP Transit
KINX Dogok
Dogok-dong, Gangnam-gu
- L2 and DWDM
- Direct KINX-IX connection
- Cross Connect · Cloud Connect · IP Transit
Netreality SL1
Gasan-dong, Geumcheon-gu
- L2 and DWDM
- High-power racks
- Cross Connect · IP Transit
- Maximum per link
- 100 Gbps
- 1, 10, 40 or 100 Gbps, scalable with LAG
- Metro average latency
- < 5 ms
- Metro average; per-route figures are confirmed in your quote
- Availability SLA
- 99.99%
- Terms for your link are confirmed in your quote
- Fiber recovery SLA
- 6 h
- Maximum time to repair a fiber fault
Common setups
Load an example into the quote builder and adjust it.
High-bandwidth backbone between two sites
A dedicated high-bandwidth circuit between KINX and Netreality SL1.
Up to 100 Gbps per link, and LAG when one link is not enough.
- Route
- KINX Gasan – Netreality SL1
- Bandwidth
- 100 Gbps
- Protection
- Protected
Separate production and DR sites
A geographically redundant link over dual paths, between sites in different districts.
Protected fails over automatically. Fiber faults are repaired within 6 hours.
- Route
- KINX Gasan – KINX Dogok
- Bandwidth
- 10 Gbps
- Protection
- Protected
Data replication between sites
Low-latency peering and data replication between nodes, such as MSP or CDN nodes.
Traffic stays off the public internet, at under 5 ms metro average.
- Route
- Netreality SL1 – KINX Dogok
- Bandwidth
- 40 Gbps
- Protection
- Protected
Hybrid cloud
A dedicated L2 link from a private environment to a KINX site, where Cloud Connect reaches public clouds.
Cloud Connect is available at KINX Gasan and KINX Dogok.
- Route
- Netreality SL1 – KINX Gasan
- Bandwidth
- 10 Gbps
- Protection
- Unprotected
A link that stays up through failures
Protected moves traffic to the second path automatically when a failure occurs.
- Setup
- Two separate paths join the same two sites.
- On a fiber cut
- If path 1 is cut, traffic fails over to path 2 automatically and the link stays up.
- Failover
- Automatic, with real-time availability monitoring
- Maintenance
- Traffic switchover without interruption
- Recovery
- Fiber recovery within 6 hours
Connected
- 1Path 1 cut
- 2Path 2 takes over
- 3Link stays up
Transport and topology
All three sites support L2 and DWDM.
L2-based
Ethernet at Layer 2 between sites, as if they shared one switch.
- Dedicated Ethernet L2 connection
- Point-to-Point or Multipoint
- Bandwidth scaling with LAG
DWDM-based
Several wavelengths share one fiber, each an independent channel.
- DWDM across the whole metro fiber network
- High-availability transmission
- Up to 100 Gbps per link
Topology
Point-to-Point and Multipoint set how sites join. Ring and Dual set how protected paths run.
Technical specification
- Link capacity
- Up to 100 Gbps per link
- Bandwidth options
- 1, 10, 40 or 100 Gbps
- Technology
- DWDM / Ethernet L2
- Configuration
- Point-to-Point or Multipoint L2, bandwidth scaling with LAG
- Protection
- Unprotected (single path) or Protected (dual path); Ring or Dual topology
- Latency
- Under 5 ms, metro average
- Monitoring
- Real-time availability and link status, 24/7 technical support
- Recovery SLA
- Fiber recovery within 6 hours
- Availability
- 99.99% SLA
- Sites
- KINX Gasan, KINX Dogok, Netreality SL1
Configure a link and request a quote
Every link is priced on the two sites, the bandwidth and the protection. Your choices go to our sales team with your inquiry.
Your link
Link from KINX Gasan to KINX Dogok, 10 Gbps, Protected
- Route
- KINX Gasan – KINX Dogok
- Bandwidth per link
- 10 Gbps
- Protection
- Protected, 2 separate paths
- Latency
- Under 5 ms, metro average
- Price
- Custom quote
Frequently asked questions
What is Metro Connect?
Metro Connect links data centers in Seoul and the metropolitan area with a dedicated L2 network. Low-latency, high-bandwidth links run over a DWDM backbone, so the data centers work as if they shared one switch.
Which data centers can be connected?
Major data centers in Seoul and the metropolitan area, including KINX Gasan, KINX Dogok and Netreality SL1. All locations are connected over the DWDM backbone.
What is the latency?
Under 5 ms on average between data centers. Traffic runs directly on a dedicated DWDM backbone, off the public internet.
How does redundancy work?
Choose Unprotected (single path) or Protected (dual path). Protected fails over automatically, so service continues if one path fails.
How is pricing determined?
Each link is quoted on the two data centers, the bandwidth and the protection (Protected or Unprotected). Contact Sales for an exact price.
More in Infrastructure
Colocation
Carrier-neutral data centers
Learn more about ColocationCross Connect
Physical links within a data center
Learn more about Cross ConnectCloud Connect
Private links to public clouds
Learn more about Cloud Connect
Planning a link?
Send the two sites, bandwidth and protection, and our sales team will prepare a custom quote.